Never be afraid to paint outside the lines

“Negative Space”—finished

Negative Space

As soon as I saw the new Infinity—Combined Army starter pack in my local game store, I wanted to paint it. In fact, that was the box that ended up getting me started on my recent Infinity kick. I have to say the models are fantastic, light-years ahead of the older Infinity models; they are very easy to clean, and tremendously fun to paint.

Negative Space

The base was the first thing I built, and is primarily composed of parts of the optical drive and heat sink from my old MacBook (which I replaced once it started constantly crashing), mounted on a resin block from Secret Weapon miniatures. The base presented some interesting engineering challenges, to make it structurally sound where a thin piece of plasticard was sticking out from a resin block and just attached at the edge, so I added some plasticard braces and carved a groove in the resin block for extra support.

Negative Space

The miniatures are all magnetized to the base, so that they can be removed to be usable as gaming pieces or just be appreciated on their own, but snap nicely onto the base in the appropriate position and orientation for group display. This was especially nice for entering into the Gen Con competition, which requires units to be presented together on a display base. Making everything nice and stable as a unit also makes things safer when being handled by the judges and their minions.

Negative Space: Fraacta, Umbra Legates, Maakrep, Fraacta

From left to right: Fraacta, Umbra Legates, Maakrep, Fraacta.

Negative Space: Umbra Legates

Originally I intended to paint the entire box up as a unit, but ended up dropping the Unidrons and adding an extra Fraacta. The base I built was not really large enough for six models, I wasn’t really happy with the first Unidron I painted up, and I really liked the new Fraacta model that had just come out.

Negative Space: Fraacta

The running Fraacta was the last model I painted, and turned out the best because I had the color scheme down at that point. In the sculpt, the Fraacta is jumping off of some weird, pseudo-organic piece of rock. In order to make it match the base, I had to completely resculpt that rock to look mechanical, and then incorporate it into the base in such a way that it looked at least plausible for it to be mounted at that angle. I ended up cutting a big hole in the base to make it look like a part which could be rotated out to provide access to something underneath.

Negative Space: Fraacta

It’s hard to appreciate from the photos, but three of the four models have holes going all of the way through the bases. My favorite is the base of the standing Fraacta, where I carved out a circle from the middle of the base, and mounted a brass-etch grate and a clear piece of plastic (from a blister pack). I think incorporating negative space into most of the miniatures’ bases as well as the group display base makes them hang together really well as a unit.

Negative Space: Maakrep

The Maakrep was the first miniature I painted of the group, and ended up much greener than the others. I painted the standing Fraacta second, and that was when I really nailed the color scheme down. I ended up having to go back to the Maakrep and add a lot of turquoise glazes so that the colors would match.


This piece won first place in the unit category of the Gen Con painting competition, and was awarded a gold under their open judging format. Additionally, Angel Giraldez, the studio painter for Infinity, was at the con, and told me that he really liked my entry, which was very flattering. Thanks Angel!

2 Comments

  1. Ryan P.

    Curious could to you do a walk through of this scheme? I’m a bit color blind and I love the jade scheme over reds which are harder for me to paint, but looking at your work its pretty intimidating to try to approach.

    • David

      I love red and turquoise. It’s basically a complementary color scheme according to modern color theory, because, depending on the choice of color model, the complement of red can be anything from green to cyan. This is a pretty straight red/turquoise color scheme, with red and turquoise as the only saturated colors, and the remaining colors fairly neutral (mostly white and black). There’s also a bit of rusty desaturated red-orange on the base.

      For an even simpler version of a red/turquoise color scheme, you can check out Abalám. This one also mainly uses red, turquoise, white, and black, with a small amount of gold. Gold or yellow is a good third color to add to a red/turquoise color scheme, because it changes the overall scheme from a complementary one to a triadic color scheme, using the traditional primaries of red, yellow, and cyan.

      Is this what you meant by a “walk through”? I might even write an article on the red/turquoise color scheme, as it is one of my favorites, which I use in both straight and more oblique ways.

Leave a Reply

Your email address will not be published. Required fields are marked *

© 2024 Light Miniatures

Theme by Anders NorenUp ↑